3 electronic solutions division interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? four-wall header .100 .100 latch/ejector, straight, compliant pin 3000 series military (with 3ms 3518 and n3518 polarizing key) ? and centerbump polarization optional ejector latches ? optional polarizing posts ? mounting holes for securing header to board ? dependable eye-of-the needle pin design ? optional high-temperature insulator ? see regulatory information appendix (ria) for ? chemical compliance information date modifed: april 30, 2008 ts-0478-b sheet 1 of 3 physical insulation: material: glass filled polyester (pbt) glass filled polyester (pct) flammability: ul 94v-0 color: gray (pbt), black (pct) contact: material: copper alloy plating: underplating: 100 ? [ 2.54 m ] nickel wiping area: 30 ? [ 0.76 m ] gold solder tails: 100 ? [ 2.54 m ] tin lead or 300u [7.62 um] matte tin (see ordering information) marking: 3m logo, part identifcation number and orientation triangle electrical current rating: 1 a insulation resistance: >1 10 9 at 500 v dc withstanding voltage: 1,000 v rms at sea level environmental temperature rating: -55c to +105c ul file no.: e68080
3 electronic solutions division interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? four-wall header .100 .100 latch/ejector, straight, compliant pin 3000 series ts-0478-b sheet 2 of 3 c . 1 0 0 2 . 5 4 r e f . b . 2 5 6 . 4 . 3 4 8 . 6 . 2 8 7 . 1 d . 1 0 0 2 . 5 4 re f. p o s i t i o n # 1 . 0 2 0 0 . 5 1 . 1 3 3 . 2 2 x o . 1 0 0 [ 2 . 5 4 ] s e e n o t e # 2 . 1 8 5 4 . 7 0 -620 t 0 2 heade r wit h s hort e ject o r / lat c h f o r 3m socket s wit hout s t rain reli e f -600 t 0 2 heade r with n o e j ecto r/l a tch - 6 30t02 hea der w i th l o ng eject o r / lat c h for 3m sockets with strain reli e f . 0 8 [ 2 . 0 ] . 0 8 [ 2 . 0 ] .97 ref [ 2 4 . 6 ] . 5 7 3 . 010 [ 1 4 . 5 5 ] . 4 2 4 .01 0 [ 1 0 . 7 7 ] 1 . 0 7 r e f [ 27. 2 ] . 37 ref [ 9 . 4 ] . 46 ref [ 11. 7 ] a notch a ( s ee table & not e 1 ) notc h c (see tab l e & n o te 1 ) n o tch b (see tabl e ) . 3 5 [ 8 . 9 ] . 2 1 [ 5 . 3 ] . 1 6 [ 4 . 1 ] . 020 [ 0 . 51] . 6 8 [ 1 7 . 3 ] . 2 4 [ 6 . 1 ] . 3 0 [ 7 . 6 ] . 1 9 [ 4 . 8 ] . 025 . 002 s q typ [ 0 . 64] . 1 7 5 . 010 [ 4 . 4 4 ] p o s i tio n 1 o r ient a t ion tria ngle a a section a-a c a .68 [17.3] inch (mm) .005 .1 .01 tolerance unless noted .0 .00 .000 inch [ ] dimensions for reference only notes: 1. notches a & c will accomodate 3m polarizing keys 3518 or n3518. 2. accepts rear and front entry mounting hardware: rear entry: #4-24 thread cutting screw 3m part # 3341-5 (.116 [2.95] dia. mounting hole). front entry (prior to installation of latch): #2-56 bolt and nut 3m part # 3341-6 (.106 [2.69] dia. mounting hole).
3 electronic solutions division interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? four-wall header .100 .100 latch/ejector, straight, compliant pin 3000 series ts-0478-b sheet 3 of 3 pin qty 3m part number dimensions polarizing notches provided insertion platen 3442-00xx a b c d 10 3793 1.26 (32.1) 1.105 (28.07) 0.865 (21.97) 0.71 (18.0) bc 3442-0048 14 3314 1.46 (37.2) 1.305 (33.15) 1.065 (27.05) 0.91 (23.1) bc 3442-0049 16 3408 1.56 (39.7) 1.405 (35.69) 1.165 (29.59) 1.01 (25.6) abc 3442-0050 20 3428 1.76 (44.8) 1.605 (40.77) 1.365 (34.67) 1.21 (30.7) abc 3442-0051 24 3627 1.96 (49.9) 1.805 (45.85) 1.565 (39.75) 1.41 (35.8) abc 3442-0052 26 3429 2.06 (52.4) 1.905 (48.39) 1.665 (42.29) 1.51 (38.3) abc 3442-0053 30 3440 2.26 (57.5) 2.105 (53.47) 1.865 (47.37) 1.71 (43.4) abc 3442-0054 34 3431 2.46 (62.6) 2.305 (58.55) 2.065 (52.45) 1.91 (48.5) abc 3442-0055 40 3432 2.76 (70.2) 2.605 (66.17) 2.365 (60.07) 2.21 (56.1) abc 3442-0056 50 3433 3.26 (82.9) 3.105 (78.87) 2.865 (72.77) 2.71 (68.8) abc 3442-0057 60 3372 3.76 (95.6) 3.605 (91.57) 3.365 (85.47) 3.21 (81.5) abc 3442-0058 64 3764 3.96 (100.7) 3.805 (96.65) 3.565 (90.55) 3.41 (86.6) abc 3442-0059 ordering information note: 3. listed below are the pcb hole sizes and tolerances recommended for use with 3ms compliant pin header. the insertion force is designed not to exceed 40 pounds per pin and the withdrawal force is not less than 10 pounds per pin. 4. use of snap-in latch/ejectors in either short (n3xxx-650t02xx) or long (n3xxx-660t02xx) styles, installed or shipped separately. (-5 & -6 snap-in latches are dimensionally and functionally equivalent to -2 & -3 roll pin latches) plating suffx: tc = 30 ? gold w/tin-lead tails (app. e2 & c2 apply) rb = 30 ? gold w/matte tin tails (app. e1 & c1 apply) prefx: blank = std.temp gray (pbt): (tc plating reqd) n = high temp black (pct) (rb plating reqd) 3m part number latch/ejector system: 0 = no latch/ejectors 2 = short latch/ejectors 3 = long latch/ejectors 5 = short, snap-in latch/ejectors 6 = long, snap-in latch/ejectors x xxxx - 6x0t02xx . 106 [ 2 .69 ] o r . 1 1 6 [ 2 . 95] ( s ee not e 2 ) s e e n o t e 3 . 300 m i n [ 7 . 62] s i de t o s i d e s t a ckabi lit y 4 x . 0 0 2 . 0 0 1 [ 0 . 05] b reak edg e s . 1 0 0 .00 3 [ 2 . 54] .06 0 [ 1 . 5 2 ] 4 x r . 009 max [0 . 2 3 ] r . 0 20 sym [0 . 51] .10 0 . 0 0 3 [2. 5 4 ] . 352 [ 8 . 94] p o sition 1 b s e ctio n r-r r e commende d mou n ting h o le pattern section s-s se ction t-t r s t r s t t ail section co mpli ant s ection m atin g area pin cross sections hole size for: preferred drilled - ?.0453 .0005 acceptable drilled - ?.0453 +.0005 -.0010 after etchback - ?.0460 max after plating - .?040 .003 board thickness - .093 to .150 plating: .001 minimum copper plating thickness .0003 min tin plating if ordering snap-in style latches separately, please use the chart below short latch long latch color high temp (ppa) 3505-30 3505-31 gray high temp (ppa) n3505-30b n3505-31b black assembly equipment: use 3442-00xx platen (see chart above) and appropriate commercial arbor press to press header into pc board.
regulatory information appendix 3m electronic solutions division/interconnect europe appendix e1: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product is rohs compliant 2005/95/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e2: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/747/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e3: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment as amended by commission decision 2005/618/ec. this product contains lead in the solder tail area in excess of the maximum concentration value allowed. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e4: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains decabde in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/717/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below.product warranty stated below. ria-2217a-d
appendix e5: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical and electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under item 6 of the annex to the directive. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. china appendix c1: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix c2: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. the numerical reference in the symbol above should not be construed as a representation regarding the products life or an extension of a product warranty. the product warranty is stated below. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the product warranty stated below. ria-2217a-d
important notice all sta tements, technical informa tion, and recommenda tions rela ted to 3m? s products are based on informa tion believed to be reliable, but the accurac y or completeness is not guaranteed. before using this product, you must evalua te it and determine if it is suitable for your intended a pplica tion. y ou assume all risks and liability associa ted with such use. an y sta tements rela ted to the product which are not contained in 3m? s current publica tions, or an y contrar y sta tements contained on your purchase order shall ha ve no force or effect unless expressly a greed upon, in writing, by an authorized of?cer of 3m. w arranty; limited remedy; limited liability . this product will be free from defects in ma terial and manufacture for a period of 90 days from the time of purchase. 3m makes no o ther w arranties including, but no t limited to , any implied w arranty of merchant ability or fitness for a p ar ticular purpose. if this product is defective within the warranty period sta ted above, your exc lusive remed y shall be, a t 3m? s option, to replace or repair the 3m product or refund the purchase price of the 3m product. except where prohibited by la w , 3m will not be liable for an y indirect, special, incidental or consequential loss or damage arising from this 3m product, regardless of the legal theor y asserted. p l e a s e r e c y c l e . p r i n t e d i n u s a . ? 3 m 2 0 0 8 . a l l r igh t s r ese r ve d . r i a - 2 2 1 7 a - d ? 3 m ele c t r o n i c s o l u t i ons d ivi s i o n 6 8 0 1 r i ve r p l ace b l v d . a u s t i n , t x 787 2 6 - 9 0 0 0 u .s. a . 1 - 8 0 0 - 2 2 5 - 5 3 7 3 www . 3 m . c o m / i n t e rcon n e c t s 3m is a trademark of 3m compan y . ap p e n d ix c 3 : c hin a r ohs e l e c t r o n i c i ndu s t r y s t a n d a rd o f t he p eo p l e ? s r e p u b l i c o f c h i n a , s j / t 1 1 3 6 3 - 2 0 0 6 , r e q u i r e men ts f or c o n c e n t r a t i o n l i m i ts f o r c e r t a i n ha z a r d o u s s u b s t a n c e s i n e l e c t r o n i c i n f o r m a t i o n p r o d u c t s . t h i s s ym b o l , p e r m a r k i n g f or t h e co n t r o l o f p o l l u t i o n c a u s e d b y e l e c t r o n i c i n f o r m a t i o n p r o d u c t s , s j / t 1 1 3 6 4 - 2 0 0 6 , m e a n s t h a t t he p r o d u ct o r p a r t d oe s c o n t a i n a s u b s t a n c e , as d e t a i l e d i n t h e c h a r t be l o w , i n e x c e s s o f t he f o l l o w i n g m a x i m u m c onc e n t r a t i o n v a l u e s i n a n y h o m o g e n eo u s m a te r i a l : (a) 0 . 1 % ( b y w e i gh t ) f or l e a d, m e r c u r y , h e x a v a l e n t c h r o m i u m, p o l y b r o m i n a te d b i p h e n y l s o r p o l y b r o m i n a te d d i phe nyl e t h e rs ; o r ( b ) 0 . 0 1 % ( b y w e i gh t ) f o r ca d m i u m . u n l e s s o t h e r w i s e s t a te d b y 3 m i n wr i t i n g , t h i s i n f o r m a t i o n r e p r ese n t s 3 m ? s be s t k n o w l e d g e a n d be l i e f b as e d u p o n i n f o r m a t i o n pro v i d e d b y t hird p a r t y sup p l i e rs t o 3 m . t h e n u m e r i c a l r e f e r e n c e i n t h e s ym b o l a b ove s h o ul d n o t be c o n s t r u e d as a r e p r ese n t a t i o n r e g a r d i n g t he p r o duc t ? s l i f e o r a n e x te n s i o n o f a p r o d u ct w a r r a n t y . t h e p r o duc t w a r r a n t y i s s t a te d be l o w . i n t h e e v e n t a n y pro duct i s pro v e n n o t t o c o n f o r m w i t h 3 m ? s r e g u l a t o r y i n f o r m a t i o n a p p e n d i x , t h e n 3 m ? s e n t i r e l i a b i l i t y a n d b u y e r ? s e x c l u s i v e r e m e d y w i l l be i n a c c o r d a n c e w i t h t h e p r o d u c t w a r r a n t y s t a te d be l o w .
|
